Here is a quick guide on how to disassemble the pieces safely without breaking them.
Popular furniture that is present in many homes is the recliner chair. You can learn how to disassemble a recliner chair for your home or workplace in this blog post.
To Take Apart a Recliner Chair, You Need the Following
- an instrument with a Phillips head. The removal of the screws holding the various components together requires the use of this. If necessary, it can also be used as a prying instrument.
- a tiny screwdriver or nut driver for removing screws from the chair’s arms, legs, and any backrests that might be attached by screws. These smaller tools can also be used to take off springs in order to remove pieces of fabric more easily
- Razor or utility knife. This is needed for cutting through the fabric in order to remove it
- a sizable or large supply of zip ties. These will be used in place of screws and bolts, which you can’t use when a piece needs to have movement
- Teflon tape, if desired. For sealing the connections between metal parts and other materials that may be sensitive to the elements
- Thread. If any of your chair’s fabric is loose or coming undone, you can use this in place of a needle and thread
- If you want to restore everything to new condition, iron (optional).
Steps on Taking Apart a Recliner Chair
Step 1. Put on safety gloves with grip pads for easy handling
Step 2. Lay the chair down with the backside up and remove all of the fabric pieces for easier access
3. Remove a couple of springs from one side. This will make it so that you can flip over the piece to start working on both sides without needing to keep turning around or undoing your work
Separate each section by starting at one end and working your way down to the other end and then on to the next one
4. Remove any screws from the joints that are holding it together. Make note of how many you took out so when you put them back in, they will be all lined up properly
Step 5. Take off springs until nothing is left but a pile of metal pieces with some fabric strewn about
Follow the original placement of each spring to place them all back where they belong.
Step 6: Remove the metal screws and washers and set them on a spotless surface. You will need to use these later when you are putting everything together again.
So that you can work on both sides, turn each piece over one at a time. The chair may still be held together by some bolts, so search for them. With a screwdriver, remove them, and add them to your pile.
Step 7: Turn all of the metal components over so that you can disassemble them from both sides. Take it off and place it on the pile if there is an area where something appears to be missing or incorrect.
8. Use a screwdriver to remove any remaining bolts and replace them where they belong if you find any.
Try to put everything back together after completely disassembling your chair by going back to the way it was originally put together. Restart from the point where you took it apart if something doesn’t fit right or goes wrong.
Do Recliner Chairs Come Apart?
Yes, they do, and disassembling an upholstered chair only requires unscrewing a few of the bolts on the back and sides of the chair.
You should be able to flip over all of the metal pieces if there is no cushioning or cover to prevent them from being held together by gravity, which will not be strong enough to hold everything together.
The assembly won’t work that way because of how tightly everything is packed if you have a fully upholstered chair with springs. In order to prevent them from becoming loose, you should carefully remove any screws or bolts you find on either side of the back while keeping everything else in place.
How Do You Disassemble a Lazy Boy Recliner?
No particular furniture brand’s disassembly instructions apply to recliners.
When disassembling a Lazy Boy recliner, the back and side bolts can be undone, the chair can be turned over so that gravity holds everything in place, or the springs can be completely removed by loosening the back and side screws.
How Do You Remove the Back of An Electric Recliner?
With the aid of a screwdriver, the back of an electric recliner can be removed.
Then, twist it until you hear or see it begin to loosen up so you can remove it. Insert the tip into any hole on either side.
Some models may be easier to remove because they have screws on top, whereas others may not require as much assistance due to their design.
What Are the Steps in How to Take Apart a Recliner Chair?
The process for disassembling a recliner is not specific to one brand of furniture and comes as such:
Then, either flip it over so that gravity can hold all of its pieces in place while you work on it or remove the armrests and any head rests, and lastly, carefully pull apart the back of either side until it separates by unscrewing any bolts holding it together.
How to Remove the Back of Your Recliner
#1 – Find Out If Your Recliner Has a Removable Back
Your recliner’s back upholstery section may have a removable piece that is typically fastened using velcro or another removable adhesive. If your recliner’s rear cover flap can be opened, the back can be taken out.
To make access simpler, swivel your recliner or tilt it. Near the bottom, inspect the corners. If the back and bottom sections of the recliner are stitched together, it is attached and cannot be taken out. However, you should be able to remove the back of the recliner without too much difficulty if the bottom of the back section has velcro flaps or another removable feature.
Once you’ve determined that you can remove the back of your recliner, take the velcro adhesive and remove the back flap of the recliner for easier access. The next step is, which you can proceed to after…
#2 Find the Attachment Levers Or Buttons on Either Side of the Recliner Back
As you can now see the back of the recliner, look on each side of the chair for a matching set of buttons or levers between the back and the seat. The levers separating the two sections ought to be audible.
The locking mechanism that keeps the back of your recliner locked during normal use is controlled by these lever handles. Once you can feel the levers, pull them until you feel the back of the recliner release. This should make it possible to store items more easily accessible by not having to remove the recliner’s back.
A piece of advice: If you’ve had your recliner for a while, you might find it difficult to move the levers on the back. It’s not necessary to pinch any fingers when attempting to pry the levers, though. Simple use of a flat head screwdriver to loosen the lever and wiggle the back will release that side.
#3 Remove the Back of Your Recliner
The recliner is easy to remove after you’ve pulled the two levers on either side of it. Pull up on the back of the recliner, and the recliner back should easily slide out and then be placed wherever is convenient for you.
Knowing not to fully lift the back up until both sides are free is crucial. When one side is free and lifted off, it can be very difficult to loosen the other side or you risk twisting the bracket that is still attached.
The majority of recliners’ backs can rest on top of the seat cushion, creating a much smaller profile that is simpler to transport during a move. If you are trying to squeeze a recliner through a doorway or a small hallway, you can also transport them in two sections.
When moving houses or getting ready to move, be mindful of your walls and corners when fitting into small spaces. If not handled carefully, a recliner chair can harm your living room, hallways, or door trimming.
How to Reattach Your Recliner Back
Your recliner can now be transported through narrow openings or stored more compactly during a move thanks to your knowledge of how to remove the back. But keeping your recliner in working order also depends on reattaching that back. Here’s how to reattach the back to your recliner.
Simply take the recliner back and line up the two metal bars on either side with the cushion side facing forward. Simply slide the back of the recliner down until you hear it click into place after aligning the bars. Your recliner is now ready for use once more after the recliner back has been properly positioned and locked.
Don’t Let a Large Recliner Get in Your Way
Stress can be a part of large moves. You ought to be able to take out the back of your recliner so that moving furniture is as stress-free as it can be. Keep in mind that velcro adhesives on removable backs can provide you with simple access to the back.
Remember that there are two levers, or occasionally buttons, between each side of the recliner back. Pulling each one will release the back of the recliner, which can then be conveniently removed for storage or transportation.
Just slide the back of the recliner into place until it clicks and locks, and you can quickly reattach it after you’ve taken the back off. Removable back recliners should make those narrow doorways and crowded staircases hassle-free.
If you are looking for a recliner with a removable back for easier transport in Cincinnati, Dayton, Northern Kentucky, Louisville, or southern Indiana, think about going to a Furniture Fair showroom close to you.
Over 55 years have passed since the founding of Furniture Fair. The company offers both manual and power reclining options, many of which include recliner features like LED cupholders and console storage.
Visit a location near you to learn more about the reclining options available to you, or schedule an appointment online with one of our highly trained sales experts. You might be closer than you think to finding the ideal recliner.
